makes us happy
Fiber materials
AFIT® Multi
AFIT® Multi is a universal gasket sheet made of aramid fibers and high temperature resistant additives, bonded with synthetic elastomers.
The material is suitable for applications involving solvents, gases, hydrocarbons, water and acids.
AFIT® Multi is KTW and DVGW approved.
Corresponds to Elastomer-Guideline.
The material is on stock in thicknesses 0.5 / 0.8 / 1.0 / 1.5 / 2.0 / 3.0 mm
Tesnit® BA-50
TESNIT® BA-50 is a special gasket material based on aramid fibers and NBR nitrile rubber. The gasket material has excellent chemical resistance and good dynamic resistance. The material offers a wide range of general application possibilities. It is used in the gas, food and chemical industry. TESNIT® BA-50 is also approved by many institutions such as DVGW, KTW, SVGW, WRc, Germanischer Lloyd.
Corresponds to Elastomer-Guideline.
TESNIT® BA-SOFT
Especially developed for demanding applications where only low screw loads are available and flange irregularities must be compensated. The material offers high compressibility and increased resilience and also provides improved mechanical and thermal properties. It can be used to seal mineral oils, fuels, lubricants, refrigerants, steam, air and many other media.
AFM 34®
AFM 34® is an asbestos-free gasket material. It contains aramid fibers, inorganic fillers and other high-temperature resistant substances which are bonded under increased pressure and temperature with high-quality elastomers to form a high-strength and particularly gas-tight seal.
REINZOLOID FS 53®
This impregnated sealing material is based on glue-bonded cellulose fibers. It is an inexpensive sealing material with good resistance to oils and fuels. The material is also compressible and adaptable.
KLINGERSIL® C‑4400
KLINGERSIL® C‑4400 is a sealing material based on aramid fibers bonded with NBR. It is suitable for use with oils, water, steam, gases, salt solutions, fuels, alcohols, weak organic and inorganic acids, hydrocarbons, lubricants and refrigerants.
KLINGERSIL® C‑4500
KLINGERSIL® C‑4500 is a gasket sheet material based on carbon fibers and special high-temperature resistant additives bonded with NBR. The material was developed and is particularly efficient for many applications within the chemical industry with main use involving strong alkaline media and steam at higher temperatures.
KLINGERSIL® C‑4430
KLINGERSIL® C‑4430 is an optimized combination of synthetic fibers bonded with NBR. The material is resistant against water and steam at higher temperatures as well as oil, gas, salt solutions, fuel, alcohol, weak organic and inorganic acids, hydrocarbons, lubricants and reigerants.
Abil®
Abil® is a sealing paper based on cellulose fibers and NBR binders. It is mainly used for sealing against hot and cold oils, greases, fuels and cooling water with corrosion and antifreeze additives.
Lowoflex®
Lowoflex® is a sealing paper for simple and less demanding applications. The materials is an asbestos-free fiber-bonded gasket sheet.
Seals made from other renowned materials are also available on request. Get in contact with us now — we are happy to advise you!
We would like to point out that the individual application conditions have an influence on the properties of each single product. For this reason the customer is responsible to perform a suitability test of the materials. The use of our materials is exclusively within the user’s responsibility.